8
How to Connect the DVI RS-232 over Fiber
1.
Connect the Single-Link DVI-D source to the DVI RS-232 over Fiber sending
unit’s DVI input port using the supplied DVI cable.
2.
Connect the RS-232 source to the DVI RS-232 over Fiber sending unit’s RS-
232 input port using the supplied DB-9 serial cable.
3. For IR repeater functionality, please connect the IR emitter’s mini-jack (sold
separately, part # EXT-2IREMIT) into the DVI RS-232 over Fiber sending
unit. Place the IR emitter directly on or above the IR receiver of the desired
source device.
4. Connect the DVI RS-232 over Fiber sending and receiving units together
using one user supplied SC terminated multi-mode fi ber optic cable and one
CAT-5, CAT-5e or CAT-6 cable.
NOTE:
If fi eld terminating network cable, please adhere to the TIA/EIA568B
specifi cation. Please see page 9 for more information.
5. Connect the DVI-D capable output device to the DVI output port of the DVI
RS-232 over Fiber receiving unit using a user supplied DVI-D cable.
6. Connect the RS-232 device to the RS-232 output port of the DVI RS-232
over Fiber receiving unit using a user supplied DB-9 serial cable.
7. Plug the included 5V DC power supplies into both the DVI RS-232 over Fiber
sending and receiving units.
8. Power on the display fi rst and the source second.
CONNECTING AND OPERATING THE DVI RS-232 OVER FIBER
