22
OPERATING THE 8X8 CROSSPOINT MATRIX FOR HDMI
Routing Sources using the IR Remote Control
Buttons
1 - 8
on the IR remote control correspond to each HDMI input (Input 1 - 8) on
the Matrix. Buttons
A - H
correspond to each HDMI output (Output A - H). To route a
source to a display, press the desired output fi rst, then press the input.
Routing Example: Route Input 4 to Output C
1.
Select Output C by pressing button
C
on the IR Remote Control.
The letter C will appear in the upper right-hand corner of the LCD display:
2.
Select Input 4 by pressing button
4
on the IR Remote Control. The number
4 will appear in the lower right-hand corner of the LCD display:
LED indicates a
p
button was pressed
p
Output C selected
p
Input 4 selected
