page | 9
Internal EDID
Use this EDID mode if problems are encountered when using the external EDID.
The built-in internal EDID provides the source device with a “generic” EDID which
can be used by all display (sink) devices.
1.
Select the internal EDID mode. Refer to
Selecting the EDID Mode (page 8)
.
2. Press and release the
Reset
button on the front panel of the splitter to reset the unit.
The splitter must be reset (or power-cycled) each time the EDID mode is switched.
The table, below, displays the video timings and audio formats supported by the
internal EDID.
Video Timings
Audio Formats
1280 x 720p @ 50 Hz
1280 x 720p @ 59.94 / 60 Hz
1920 x 1080i @ 50 Hz
1920 x 1080i @ 59.94 / 60 Hz*
720 x 480p @ 59.94/60 Hz
720 x 576 @ 50 Hz
1920 x 1080p @ 50 Hz
1920 x 1080 @ 59.94 / 60 Hz
1440 x 480p @ 59.94 / 60 Hz
1440 x 576p @ 50 Hz
LPCM (2CH),
Dolby Digital (2CH/5.1CH),
DTS Digital Surround™
(2CH/5.1CH)
*
Native resolution
NOTE:
All sink devices connected to the splitter
must
be compatible
with at least one resolution / audio format specified in the internal
EDID. If one of the connected displays does not support xvYCC,
then this feature is removed from the EDID.
EDID Management
Operating the 1:5 Splitter for HDMI 1.3
Summary of Contents for EXT-HDMI1.3-145
