Gefen GTV-DIGAUD-2-AAUD, User Manual

How to Connect the Digital Audio to Analog Adapter

1.  Connect an Optical and/or Coax cable from the audio source(s) to the Digital 

Audio to Analog Adapter.

2.  Connect a set of L/R analog RCA-type audio cables from the Audio L/R 

output of the Digital Audio to Analog Adapter to the inputs of the A/V 
equipment.

3.  Connect the included 5V DC power supply to the power receptacle on the 

Digital Audio to Analog Adapter and connect the AC adapter to an available 
electrical outlet.

Wiring Diagram for the Digital Audio to Analog Adapter

6

CONNECTING THE

DIGITAL AUDIO TO ANALOG ADAPTER

GTV-DIGAUD-2-AAUD

Audio Receiver

Audio Source

Converter

L/R RCA ANALOG AUDIO CABLE

SPDIF 

OR 

TOSLINK DIGITAL AUDIO CABLE

IMPORTANT:  

Before connecting the included optical cable between 

the audio source and the Digital Audio to Analog Adapter, be sure
to remove the clear plastic protective cover on both end of the 
TOSLINK™ connectors as shown in the photos below.  Use your 
thumb and index fi nger to pinch the protective cover, then gently pull
to remove the cover from the TOSLINK™ connector.