background image

Congratulations on your purchase of the Gefen 2x2 HDMI Switcher. Your complete sat-
isfaction is very important to us.

Gefen’s line of HDTV switches, extenders, and splitters are designed to make your A/V 
equipment use more comfortable, more productive and less expensive.

The 2x2 HDMI Switcher allows access to two HDTV devices, using two HDTV displays.  
Both output displays will have mirrored images.  Also included is a TOSLINK output that 
will output the digital audio signal in audio form.

The Gefen line offers solutions for Home Theater, A/V installation, noise, space and 
security concerns, data center, information distribution, conference room presentation, 
school and corporate training environments.

Our Commitment

Gefen will always offer the fi nest quality product at the best possible price. Included in 
that price is a lifetime support from a team of outstanding engineers.

The Gefen 2x2 HDMI Switcher allows two HDTV HDMI devices to be switched easily 
in to two HDTV HDMI compatible monitors or projectors. Simply connect your HDTV 
displays to the Switcher’s display outputs. The 2x2 HDMI Switcher can also be placed 
at the end of a long HDMI cable to regenerate the HDMI signal.

INTRODUCTION

1

Summary of Contents for HDMI-242













Reviews: