The SDI to DVI Adapter works with all DVI monitors that support any of the following
resolutions:
Automatic Scaling: 1024x768, 1280x720, 1280x768, 1280x800, 1280x1024 all at 60Hz.
No Scaling: 1080p (1920x1080 @24/25/30), 1080i (1920x540 @48/50/60) and 720p
(1280x720 @60).
To save the output resolution to the SDI to DVI Adapter flash EPROM, press ENT,1,2,3
on your Sony infrared monitor. When you reboot the SDI to DVI Adapter, it will restore the
output mode from flash. The default output mode is Auto Mode.
If the input signal is PAL, you can force the output to 50Hz using the RECALL button on
your Sony infrared remote control.
THE SDI TO DVI ADAPTER SUPPORTED OUTPUT RESOLUTIONS
3