page | 83
Advanced Operation
Web Interface
Main ► I/O Status
Output
Displays the state of each output for each of the following: Name, RSENSE,
Mask, HPD (Hot-Plug Detect), HDCP, and Video Mode.
Name
Displays the name of the output. The name of the output can be changed using
the
#set_output_name
command or through the
I/O Setup ► I/O Names
page
of the Web interface.
RSENSE
Displays the current Rsense state.
Mask
Displays the masking state of each output.
HPD
Displays the Hot-Plug Detect (HPD) state of each output.
HDCP
Indicates if HDCP-detection is enabled or disabled on each output.
Video Mode
Displays the current output video mode.