4
CONNECTING AND OPERATING THE VGA TO DVI SCALER PLUS
How to Connect the VGA to DVI Scaler Plus
Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler Plus
will not work without a source plugged in)
Connect the DVI (M-M) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler Plus.
Connect the power supply.
*Note: The default resolution is set to NATIVE mode.
Operating the VGA to DVI Scaler Plus
Button
Function
MENU
Shows and Hides the On Screen Menu /
Menu and Item Selection
+
Moves menu cursor DOWN the menu /
Increases adjustment values
-
Moves menu cursor UP the menu /
Decreases adjustment values
Hold
MENU
and unplug and re-plug the
power source. After you have done that,
you can release the
MENU
button
Resets scaler back to NATIVE resolution
of the display
Auto Adjust
Press the
-
button
Tunes picture to displays optimum
settings
Output resolutions that are supported:
VGA
480I
576I
WXGA
SGA
480P
576P
WSXGA
XGA
720P/60
720P/50
WUXGA
SXGA
1080I/60
1080I/50
2K/60
UXGA
1080P/60
1080P/50
NATIVE
