18
OPERATING THE MENU SYSTEM
AUDIO SETUP
This menu option will allow the user to set favorite processing modes for both the
S/PDIF and HDMI inputs. Additionally, audio enhancement modes can also be
set in this menu option. The following features are available in this menu system:
•
SPDIF FAV PROC - This feature is used to set the default processing mode
for the S/PDIF input. Selectable processing modes can be found on page
14.
•
HDMI FAV PROC - This feature is used to set the default processing mode
for the HDMI input. Selectable processing modes can be found on page 14.
•
DRC - This feature will apply compression of loud sounds over a certain
threshold while quiet sounds remain untreated.
•
ENHA. - This feature is used to set an enhancement mode. The following
enhancement modes are available:
1. Night+ Mode - This mode can be used to watch dynamic content at low
volume levels. This works by increasing the volume of quiet passages,
while decreasing the volume of load passages.
2. Voice+ Mode - This mode will isolate and enhance dialog for clearer
sounding vocals.
3. Mode - This mode will equalize the volume level when listening
to a source that has large variation in volume level. (i.e. Television
broadcast and advertisement volume differences.)
Use the
▼
and
▲
buttons on the front panel to select the desired option.
Use the
◄
and
►
buttons on the front panel to change the setting or the selected
option.
When
fi
nished, press the
▼
or
▲
to move to another selection. Alternately, the
user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu
System, press the MENU button.
