5
1
Power Status LED Indicator
This LED will indicate the current power state. When the LED is red, the unit is
in standby mode. When the LED is green, the unit is on.
2
Infrared (IR) Receiver
This IR receiver will accept commands from the included GTV-AUD-IR remote
control. This receiver requires line-of-sight between the unit and remote for
proper operation.
3
Mute / Right Button
This button will cycle between Mute-On and Mute-Off modes when not in the
Menu System. When the Mute-On mode is enabled, all audio output will be
ceased. While in the Menu System this button will cycle through available
options in the right direction when a feature has been selected for adjustment.
4
Input / Left Button
This button will toggle between the HDMI and Coaxial audio input sources
when not in the Menu System. When the HDMI source is selected, audio will
be extracted from the embedded audio within the incoming HDMI signal. When
the Coaxial source is selected, audio will be extracted from the incoming audio
source connected to the Coaxial (S/PDIF) input port. While in the Menu System
this button will cycle through available options in the left direction when a feature
has been selected for adjustment.
5
Volume Decrease / Down Button
This button is used to decrease the volume level of the audio outputs when
not in the Menu System. While in the Menu System this button will cycle down
through the current level’s options.
6
Volume Increase / Up Button
This button is used to increase the volume level of the audio outputs when not
in the Menu System. While in the Menu System this button will cycle up through
the current level’s options.
7
Main LCD Display
This display will show pertinent status information and will be used to make
adjustments to features in the Menu System.
8 Menu
Button
This button will activate the Menu System which is where all adjustment and
settings will be made.
9
Mode / OK Button
This button will change the Processing Mode when not in the Menu System.
While in the Menu System this will be used as a con
fi
rmation button.
10 Exit
Button
This button is used to exit the current menu level and return to the previous/
parent level. This button will exit the entire Menu System when on the top most
level.
11 Power
Button
This button will toggle between the ON and STANDBY power states. An LED
status indicator will signify the current power state. A RED LED will be active
when the unit is in Standby power state. A GREEN LED will be active when the
unit is in the ON power state.
PANEL DESCRIPTIONS
