N.B.: for the version R77 are not available the probe codes 0...39, 48...51, 54...58
In case of probe non-availability, maximum and minimum limits are set to 0.
In case of custom linearization, test limits for setting LO and HI errors are given by the calibration values.
If these limits are not exceeded, they are taken into consideration as limits L_S and H_S.
Select sampling time
(resolution). For linear
input 0...1V/POT only.
0 120ms > 14bit; 16000 divs
1 60ms
> 14bit; 16000 divs
2 30ms
> 13bit; 8000 divs
3 15ms
> 12bit; 4000 divs
TYPE Type
4 DIGIT
PROBE
without dec. point with dec. point
Probe: TC
0
TC J °C
0/1000
0.0/999.9
1
TC J °F
32/1832
32.0/999.9
2 TC K °C
0/1300
0.0/999.9
3 TC K °F
32/2372
32.0/999.9
4 TC R °C
0/1750
0.0/999.9
5 TC R °F
32/3182
32.0/999.9
6 TC S °C
0/1750
0.0/999.9
7 TC S °F
32/3182
32.0/999.9
8 TC T °C
-200/400
-199.9/400.0
9
TC T °F
-328/752
-199.9/752.0
10 TC B °C
44/1800
44.0/999.9
11 TC B °F
111/3272
111.0/999.9
12 TC E °C
-100/750
-100.0/750.0
13 TC E °F
-148/1382
-148.0/999.9
14 TC N °C
0/1300
0.0/999.9
15 TC N °F
32/2372
32.0/999.9
16 TC L °C
0/600
0.0/600.0
17 TC L °F
32/1112
32.0/999.9
18 TC U °C
-200/400
-199.9/400.0
19 TC U °F
-328/752
-199.9/752.0
20 TC G °C
0/2300
0.0/999.9
21 TC G °F
32/4172
32.0/999.9
22 TC D °C
0/2300
0.0/999.9
23 TC D °F
32/4172
32.0/999.9
24 TC C °C
0/2300
0.0/999.9
25 TC C °F
32/4172
32.0/999.9
26
TC °C
Custom
Custom
27
TC °F
Custom
Custom
Probe: RTD
28 PT100 °C
-200/600
-199.9/600.0
29 PT100 °F
-328/1112
-199.9/999.9
30 JPT100 °C
-200/600
-199.9/600.0
31 JPT100 °F
-328/1112
-199.9/999.9
Probe: PTC - NTC
32 PTC °C
-55/120
-55.0/120.0
33 PTC °F
-67/248
-67.0/248.0
34 NTC °C
-10/70
-10.0/70.0
35 NTC °F
14/158
14.0/158.0
Probe: V Current
36 0...60mV
-1999/9999
-199.9/999.9
37 0...60mV
custom linear
custom linear
38 12...60mV
-1999/9999
-199.9/999.9
39 12...60mV custom linear
custom linear
40 0...20mA
-1999/9999
-199.9/999.9
41 0...20mA
custom linear
custom linear
42 4...20mA
-1999/9999
-199.9/999.9
43 4...20mA
custom linear
custom linear
44 0...10V
-1999/9999
-199.9/999.9
45 0...10V
custom linear
custom linear
46 2...10V
-1999/9999
-199.9/999.9
47 2...10V
custom linear
custom linear
48
0...5V
-1999/9999
-199.9/999.9
49
0...5V
custom linear
custom linear
50
1...5V
-1999/9999
-199.9/999.9
51
1...5V
custom linear
custom linear
52 0...1V/Pot
-1999/9999
-199.9/999.9
53 0...1V/Pot custom linear
custom linear
54 200mV...1V -1999/9999
-199.9/999.9
55 200mV...1V custom linear
custom linear
Probe: Custom PT100 - PTC - NTC
56
PT100
custom
custom
JPT
57
PTC
custom
custom
58
NTC
custom
custom
• TC/LIN input parameters
Input settings
Type of probe,
signal and scale of
main input
+4 to disable filter
(average of the last eight values sampled)
Max. non-linearity error for
thermocouples (TC),
resistors (PT100) and
thermistors (PTC, NTC).
The error is calculated as
deviation from theoretical value
and is expressed as percentage of full
scale (in °C).
S, R range 0...1750°C; error < 0.2% f.s. (t > 300°C) / for other range; error < 0.5% f.s.
T
error < 0.2% f.s. (t > -150°C)
B
range 44...1800°C; error < 0.5% f.s. (t > 300°C) / range 44,0...999,9; error < 1% f.s. (t > 300°C)
U
range -99,9...99,9 and -99...99°C; error < 0.5% f.s. / for other range; error < 0.2% f.s. (t > -150°C)
G
error < 0.2% f.s. (t > 300°C)
D
error < 0.2% f.s. (t > 200°C)
C
range 0...2300; error < 0.2% f.s. / for other range; error < 0.5% f.s.
NTC error < 0.5% f.s.
Tc J, K, E, N, L
error < 0.2% f.s.
PT100, JPT100 e PTC
error < 0.2% f.s.
In
t.P
(.1.
4
81600G_MHW_4T48_07-2011_ENG
4 / 7
