User manual ADV200-…-SI with External Safety Modules
Page 7 of 13
3 Installation and use of safety functions
The installation and use of safety functions calls for several study and execution phases, specifically:
1. Risk analysis;
2. Identification and configuration of machine safety functions;
3. Design, integration and use of components involved in the safety functions;
4.
Installation and Wiring of ADV200-xxx-SI
5.
Testing the safety functions.
This manual provides information and help for phases 3 and 4, as it is the task and responsibility of the machine
manufacturer to design and integrate all safety functions.
Specifically, Paragraphs 4.1 and 4.2 provide the necessary guidelines on how to wire the ADV200-...-SI device
with the safety modules and how to use them for running the basic functions (STO, SS1, SLS, SDI).
The basic security functions provided by the safety module system should be designed for its
specific use (see Paragraphs 3.1, 3.2, 3.3, 3.4 ) by the machine manufacturer in order to fulfill the needs and
achieve the goals specified under points 1, 2 and 5.
