MAINTENANCE
128
Inspecting and Adjusting the
Track Tension
WARNING
�
If you must work beneath the raised
machine or equipment, always use
wood blocks, jack-stands or other rigid
and stable supports. Never get under
the machine or working equipment
if they are not sufficiently supported.
This procedure is especially important
when working on hydraulic cylinders.
�
The track adjuster contains highly
pressurized grease. If the tension
is adjusted without following the
prescribed procedure, the grease
discharge valve may fly off, resulting in
injury.
• Loosen the grease discharge valve
slowly.
• Do not put your face, arms, legs or
body in front of the grease discharge
valve.
• If no grease is expelled when the
grease discharge valve is loosened,
there is a problem. Contact your
Gehl dealer for repairs. DO NOT
disassemble, because this is very
dangerous.
Inspection
< CTL55 >
< CTL65 / CTL75 >
< CTL85 >
1. Lower the lift arm and tilt the bucket
forward to raise the front of the loader off
the ground as far as it will go.
2. Measure the clearance between the
center track roller and the surface of the
track where it makes contact with the
roller.
The gap (A) should be within the following
range:
25 to 50 mm (1 to 2 in.)
Adjustment
Increasing the tension
1. Remove the cover.
Every 50 Hours
T3G005
A
T8G012
A
A
T7G0141
1
T7G015
Summary of Contents for CTL55
