Disengagement
Never
leave
the
operator’s
compartment
to
disengage the lift arm support device with the engine running.
To return the lift arm support device to its storage
position:
1.
Raise the lift arm completely.
2.
Stop the engine, remove the key and take it with
you.
Before
testing
the
loader,
always clear people from the area.
3.
Before leaving the operator’s compartment, be
sure that the lift arm is being held in the raised
position by the solenoid valve (See
Note
).
4.
To store the support device, raise it up until it contacts the lift arm. Slide
the lock pin through the support device and catch under the lift arm. Once
the pin is secure, flip the lock pin loop so that it locks the pin in.
Accessory Plug (Optional)
The optional accessory plug is located at the bottom of the left instrument
panel.
Engine Speed Control
A right-hand controlled throttle lever is provided on all models for adjusting
the engine speed. Move the control forward to increase the engine speed and
rearward to decrease the engine speed.
T-Bar Controls Only:
A right-foot operated
accelerator pedal is provided to control the
engine
RPM.
The
pedal
linkage
is
spring-loaded to return to the adjusted
hand-operated throttle setting.
908268/BP0904
20
WARNING
Fig. 5: Lock Pin in
“Locked” Position
WARNING
Fig. 6: Throttle Lever
Fig. 7: Foot Pedal
(T-Bar)
Summary of Contents for SL3635
