Ref. : 450100 FR
P a g e
| 7
1.3 – General safety requirements
1.3.1 – The operator and his environment
■
To guard against the risk of accident or
injury, operators must wear:
- Solid, tight-fitting and non-flammable
clothing
- Strong gloves (of the non-slip type)
- Safety footwear
- Protective goggles
- Hard hat
- Any other equipment required on the
site or for using the machine.
■
If hearing protection is used, strict
compliance with applicable site safety
instructions is always required.
■
Ensure that machine vibrations do not lead
to a lack of feeling in your hands. Adapt
working time to the vibratory level of the
machine, which is indicated as part of
normal use.
■
For underground use (tunnel, gallery) and
in enclosed premises, ensure there is good
ventilation or extraction to prevent the risks
generated
by
the
inhalation
and
concentration of grinding particles or any
other gases (welding, grinding, etc.)
■
Do not work with the machine until you are
certain you can control it. Do not begin to work
with the machine until you are sure you can do
so in complete safety, both for yourself (good
visibility and light conditions: minimum 50lx,
comply with the requirements of EN 1837) and
for others (work calmly and carefully).
■
Ensure you maintain a very stable position on
the ground, banning all unbalanced working
positions.
■
Users must possess the necessary physical and
mental conditions to allow risk-free work.
■
The work zone must be free of obstacles. The
work zone (and its surroundings) must be clear
of flammable materials.
■
If something is not clear, whether concerning
the machine or the work to be performed, ask
a qualified person. Do not make assumptions.
■
This equipment must not be used in explosive
atmospheres.
■
Avoid working positions where exhaust fumes
could touch parts of the body (whether or not
protected).
■
Do not smoke near or when handling the
machine.
■
Do not work near a conductive rail.
■
Generally speaking, take all necessary
precautions to prevent flammable products
from coming into contact with sources of
ignition.
■
Operators must ensure that there is no-one else
within their range of action and work and, in
particular, that they are not likely to collide
with anyone in their machine operating path.
If, however, someone is in their path,
operators must stop and alert of their passage.
■
Particular attention must be paid to trucks (if
applicable) that take up the entire width of the
track and that could cause leg injuries in event
of a collision.
■
When installed on the track, the machine must
only be handled by the number of operators
strictly necessary for its normal use.
■
As machine dimensions do not allow the fitting
of fire extinguishers, we strongly recommend
that extinguishers suitable for the fire risk
types are installed in the vicinity of the
machine.
■
Users shall comply with all regulatory
environmental requirements regarding their
machine.
Summary of Contents for MP.12
