Instr 9926536
Rev 02 2016-08
Page 2 of 6
REF
QTY
PART DESCRIPTION
PART NUMBER
9
4
Washer - 8.4 X 16.0 X1.6
7556305
10
1
Solar Panel Harness, 220W
2413671
11
13
Panduit Strap
7080138
12
2
Screw - M6 X 1.0 X 16
7518637
13
2
Nut - M6 X 1.0
7547339
14
1
T-Slot, Extrusion Cover
5522130–1610
1
Instructions
9926536
TOOLS REQUIRED
• Safety Glasses
• Torx
®
Set
• Metric Wrench Set
• Metric Socket Set
• Standard Socket Set and Ratchet
IMPORTANT
Your 220W SOLAR KIT is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 50 minutes
INSTALLATION INSTRUCTIONS
1. Place vehicle in “PARK”. Turn key to “OFF”
position and remove from vehicle.
2. Remove rear deck (A) of the vehicle. Disconnect
negative cable (B) from front right battery.
3. Install mounting brackets
r
onto the solar panel
extrusion. Torque nuts
u
to following specification.
TORQUE
8 ft. lbs. (11 Nm)
Keep distance 134 mm between bracket and
inside of extrusion for all four brackets as shown.
