Instr 9926536
Rev 02 2016-08
Page 3 of 6
4. Drop the roll-in nuts
i
into the top of the OPS
slots (two per side).
5. Mount solar panel on the vehicle using bolts
y
and washers
o
. Torque bolts to following
specification.
TORQUE
17 ft. lbs. (23 Nm)
NOTE
220 Watt panel junction box to be toward right side of
vehicle.
Rear bracket to be 118 mm from rear roof cross
brace as shown.
6. Cover solar panels with cardboard packaging from
the kit.
7. Connect the solar panel harness
a
to the solar
panel connectors.
8. Use Panduit strap
s
to fasten solar panel
harness
a
to front bracket
r
on RH side.
9. Remove the thumb screws (C) from hood under
the charge port and pull the hood forward and
away from the vehicle.
