Instr 9926536
Rev 02 2016-08
Page 4 of 6
10. Mount solar charger
e
to chassis frame (D) using
bolts
d
and nuts
f
. Torque nuts to following
specification.
TORQUE
8 ft. lbs. (11 Nm)
11. See the electrical connections of the solar charger
for reference.
12. Route solar panel harness
a
into OPS T-slot
channel.
13. Cover solar panel harness with T–slot cover
g
.
14. Connect solar harness
q
to contactor assembly
(PN 4012818) (F) with red wire and motor
controller (PN 4015643) (E) with black wire.
15. Connect solar harness
q
to solar charger
e
use
panduit straps to hold in place.
