Document Reader AT10K User Guide
Introduction
Page 10 of 29
Contactless IC reading for eDL & iDL (electronic driving licenses) up to DG14 including
basic access control (BAP v1), Password Authenticated Connection Establishment
(PACE), passive/active authentication (PA/AA), Chip Authentication (CA), Terminal
Authentication (TA), supplementary access control (SAC) and extended access control
(EAC v1) are supported
Reads 1D and 2D barcodes (PDF417, Aztec, QR
®
codes and Data Matrix
TM
), SDK includes an
AAMVA decoder
Reads home print and mobile (cell) phone boarding passes (BCBP) and 1D/2D barcodes.
Data capture from HRZ and non-ICAO documents (optional software package)
Enhanced document detection and authentication software (optional software package)
Imaging features
The Gemalto Document Reader AT10K family has the following imaging features:
True-colour and anti-glare technologies deliver accurate, colour calibrated images while
minimizing interference from document laminate reflections, optically-variable security features or
ambient light
Multiple light sources for image capture and authentication
– visible (RGB), infra-red (B900 band
IR), ultra-violet (UV-A 365nm)
Captures full-colour or grey-scale images (370 and 700 DPI camera options)
Flexible software interface (Gemalto Document Reader SDK) allows host application to select
which illumination sources to use, image type, image compression, ePassport LDS data and
validation, photo extraction, etc.
Physical design features
The Gemalto Document Reader AT10K family has the following physical design features:
A progress bar with Tick / Cross indicators make reading a document intuitive, helping to direct
the user during a read and visually show the result of the read.
Unique document spine hold down clip, holds down new books and works on multiple, stapled
books.
“No clip” document hood may be removed if desired. The reader is capable of hoodless operation
in most brightly-lit indoor environments.
Simple, intuitive and quick operation that accepts documents in any orientation
Small footprint, no motorised parts, robust construction.
Supports left or right, single-handed and gloved operation.
Provides two USB2.0 ports for attaching additional biometric devices like a webcam or fingerprint
reader.
Powered from a single USB 2.0 port. An optional external power supply is available to support
externally attached modules (e.g. magnetic stripe or contact smartcard reader) or USB
peripherals.
