BGS2T AT Command Set
11.12 AT+CGQREQ
BGS2T_ATC_V01.301
Page 325 of 554
1/31/12
c
4
Up to 8 000 (64 kbit/s)
5
Up to 16 000 (128 kbit/s)
6
Up to 32 000 (256 kbit/s)
7
Up to 64 000 (512 kbit/s)
8
Up to 128 000 (1024 kbit/s)
9
Up to 256 000 (2048 kbit/s)
Mean throughput class
in octets per hour
[0]
network subscribed value
1
100 (~0.22 bit/s)
2
200 (~0.44 bit/s)
3
500 (~1.11 bit/s)
4
1 000 (~2.2 bit/s)
5
2 000 (~4.4 bit/s)
6
5 000 (~11.1 bit/s)
7
10 000 (~22 bit/s)
8
20 000 (~44 bit/s)
9
50 000 (~111 bit/s)
10
100 000 (~0.22 kbit/s)
11
200 000(~0.44 kbit/s)
12
500 000(~1.11 kbit/s)
13
1 000 000 (~2.2 kbit/s)
14
2 000 000 (~4.4 kbit/s)
15
5 000 000 (~11.1 kbit/s)
16
10 000 000 (~22 kbit/s)
17
20 000 000 (~44 kbit/s)
18
50 000 000 (~111 kbit/s)
31
best effort
Packet Data Protocol type
“IP“
Notes
•
If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val-
ues.
•
Definitions of parameters can be found in 3GPP TS 22.060
and 3GPP TS 23.060
paragraph 15.2
"Quality of Service Profile".
•
If some of the QoS parameters are omitted, they will keep their current value (or the default value if not spec-
ified so far).
•
If QOS settings are configured with
and
in parallel the MT will use only the
settings for connection setup while the
settings are ignored.
<mean>
(num)
<PDP_type>
(str)
Confidential / Released
