Getting Started with LTE Modem Cards
2.3 Start Up the Module
16
mPLAS9_mPLS8_mPLS62_startup_guide_v01
2018-12-21
Confidential / Released
Page 13 of 18
•
For example, to connect to the mPLS9-W LTE Modem Card via USB interface, check the
properties of the enumerated CDC ACM LTE USB serial port 1, call a terminal program on
the PC and connect to the assigned COM port - in the below
to COM port 47
assigned to the CDC ACM LTE USB serial port 1 (
). You may have to type the AT
command ATE1 to enable an echo for entered AT commands and then type ATI to display
module identification information.
Figure 6:
Connection via Gemalto M2M ALSx PLSx LTE USB serial port
