Installing the battery and memory card
1. Open the waterproof lid that covers the connectors, battery compartment and memory card
slot.
2. Insert the battery until the safety catch snaps into place.
3. Insert the memory card into the card slot until it is fixed firmly in the slot. Be sure to insert it
only in the correct direction, as indicated on the camera.
4. For removing the memory card, slightly press the card to release it. Only after it is released,
you may take it out.
5. If no card is inserted, the screen will display the information “No card!” as shown in the below
picture:
Note:
1. Please make sure the direction in which you insert the card is right. Otherwise, the device and/or
the memory card may be damaged.
2. It is advised to format the card via the camera settings menu before the first use.
Video recording capacity
(only for reference)
SD
Card size
(1080P) 30F
(720P) 60F
16GB
120 min
160 min
8GB
60 min
80 min
4GB
30 min
40 min
2GB
15 min
20 min
Note: The number of shots that can be taken will vary depending on device settings, the subject and
the memory card used.
