12
SIS-PM / SiS-PM-841 / SIS-PMS User Manual
11. Audible beeps and indicators
•
Long beep – will be heard after the SiS-PM is connected to the computer USB port
after the self test;
•
Short beep – will be heard by switching of the manageable sockets on and off;
•
Continuing beeps – hardware event schedule is lost – for example if the power
supply was disrupted for a long period. These beeps can be stopped by pressing the
Silence button on the side of the SiS-PM(S);
•
Alarm beep – will be heard if the managing command cannot be completed. For
example if there is a command to switch the socket on but SiS-PM is disconnected
from the power supply. The alarm will be heard every second for a minute, after that
every 8 seconds.
•
Indicator “POWER” is on - means there is power on the sockets marked with the
sign
;
•
Indicator “Socket x” is on – means there is power in this particular socket
•
Main rocker switch is light up – means SiS-PM(S) is connected to the power supply
and the SiS-PM(S) is active.
12. Technical specifications
•
Input voltage 220 – 230 VAC~ 50 – 60 Hz;
•
Maximum load current 10A;
•
Maximum current consumed by the SiS-PM from the computer USB port - 350mA;
•
Maximum current consumed by the SiS-PMS from the power supply 220 – 230
VAC~- 25mA;
•
Maximum quantity of SiS-PM connected to one computer at the same time – no
restrictions (only restricted by the maximum allowed quantity of the USB devices);
•
Plug and Play;
•
Hardware schedule restrictions;
•
Maximum number of independent hardware schedules - 16;
•
Time interval between the events – from 1 minute to 180 days;
•
Timer accuracy – not more than 3 seconds error per day.
•
Working temperature range: from +10 to +40 degrees C;
•
Size ( without power adapter and USB cable) 460*140*65
•
Weight – not more than 1,3 kg for SiS-PM or not more than 1,45 kg for SiS-PMS