6
SIS-PM / SiS-PM-841 / SIS-PMS User Manual
•
User manual
•
USB cable;
•
CD with software
•
Adaptor(optional, not included) for SiS-PM only
6. Installation of SiS-PM(S)
•
It is strongly recommended to avoid damp or wet places for installation.
•
SiS-PM(S) should be connected to the European AC wall socket of the standard
DIN 49 440;
•
SiS-PM(S) can be connected to the computer first and then to the power socket or
vice-versa.
•
It is possible to connect the SiS-PM(S) to the power source via other multi-plugs,
surge protectors, voltage regulators or UPS.
7. Connection of other devices to the SiS-PM
•
Two (the first and the last) sockets of the SiS-PM(S) are marked with the symbol
. These two sockets are switched on and off by means of the main power
switch of the SiS-PM(S) and cannot be managed by the computer. It is suggested
to use these two sockets to power up the managing computer and the hardware
schedule adapter;(Optional for SiS-PM only)
•
The sockets: Socket 1, Socket 2, Socket 3 and Socket 4 can be managed or
preprogrammed by computer via the USB interface.
•
SiS-PM(S) can be used with other multi-plugs and/or surge protectors;
•
You are NOT to connect SiS-PM(S) to powerful machines with inductive type of
load, for example: welding machines, washing machines, electric drills etc...
•
SiS-PM-841 can be connected with CAS-441-PM, CAS-841-PM using CAT-5 cable
marked “Straight-Through Cable Pinout (T568B or T568
А
)” with sockets of PM
interface
•
To work with CAS-441-PM it needs to set device’s ID = 1. This can be done using
the utility software “SiS-PM-841 Configuration Tool” after the device has been
connected to PC through the USB-cable. To work with CAS-841-PM it needs to set a
unique ID for each connected device, which will be categorically associated with the
socket number in CAS-841-PM device.
•
You can connect up to 10pcs of CAS-841-PM at the same time. Connect the first
device to RJ-45 socket using the cable described above. Both RJ-45 sockets are
equal. In this way all devices should be connected in a chain, one SiS-PM-841 to
another.
