8
SIS-PM / SiS-PM-841 / SIS-PMS User Manual
10 Power Manager Help
The
Settings dialog box
allows you to change settings for the device sockets. You may
choose the device and the socket from the "Device" and "Socket" drop down list-boxes.
•
It is possible to name and assign a certain icon to the device and socket (for
example “Printer” or “Scanner”) using the "Rename" button.
•
Check the "Disable device beeper" checkbox to disable the built-in SiS-PM beeper.
•
Check the "Show socket switch icon" checkbox if you want to put the icon of the
socket into the system tray. Such an icon is a fast way to switch the device
connected to the socket on/off or check its status.
•
You can also assign a hot key to switch the socket on/off. Check the "Switch ON"
and "Switch OFF" checkboxes and specify the hot keys.
•
To switch the socket on/off on Windows startup, check the "On Windows startup"
checkbox and choose the required action.
•
To switch the socket on/off on Windows shutdown, check the "On Windows
shutdown" checkbox and choose the required action.
•
Check the "When alarm goes on start application" checkbox and click the "Browse"
button to select the program which will be launched when the power supply to the
socket does not match the required event (i.e. the socket must be on, but there is no
power supplied to it yet).
•
Check the "When alarm goes off start application" checkbox and click the "Browse"
button to select the program, which will be launched after the alarm state (see
above) is resolved.
•
To manage SiS-PM(S) from the LAN and/or via Internet, press the button "Device
sharing...". A dialog box "Device sharing" will appear. Set the checkbox "Share this
device via network" if you want to enable the network access to the device. To
prevent unauthorized access to the SiS-PM(S) enter the access password in the field
"Password". Note: to let SiS-PM(S) work via the network the port 6100 should be
open. Contact your LAN administrator for further details.
Using the
Timer schedule
dialog box you can create the hardware timer schedule:
•
To add a new record, click the "Add" button. The dialog "Add entry" will appear. In
the dialog box, specify the required time interval and the action.
•
To edit the record, select it and click the "Edit" button or just double click on the
entry.
•
To remove the record, select it and click the "Remove" button. You can select
multiple entries using Ctrl and shift keys. You can also remove all entries from the
schedule by clicking the "Clear" button.
