6.0 EXAMPLE OF MyGTRACK MANAGEMENT
6.1 - SYSTEM CONFIGURATION
In this example, a configuration string is entered for a “MINI” version system.
Send the following SMS:
setup#000000#mini#+393475555555#393476666666#
When the configuration string is sent, the system replies:
Repeat this operation every time you want to modify your password or phone
numbers.
Setup ok with password=AA1234
Password
set
by Gemini
System
version
Main
phone
number
New
password
Emergency
phone number
(optional)
!
ATTENTION
The new password
Commands
must be a 6-digit code and can contain both numbers
and letters ( i.e.: AA1234 or aa1234). The password is key-sensitive
therefore by typing characters other than the ones entered (upper and
lower case letters are not equivalent), the system will not operate properly.
can either be sent with capital or small letters.
6.2 - VEHICLE
Send a
request SMS to the system onboard the vehicle:
loc#password#
System status (armed or disarmed); GPS (ok or no GPS);
lat:42,10,26,N;lon:013,49,08,E;spd:000;08.16;25/07/06;Google Maps Link
LOCATION
You will receive an SMS reply with the current coordinates:
location
Where: 42,10,26=latitude 42° 10’ 26” and 013,49,08=longitude 13° 49’ 08”
letters “N” and “E” stand for North and East.
NB:
Latitude
Longitude
Speed Time
Date
If you have a data plan to access internet, simply click on the Google Maps link
contained in the SMS message received in response to the locate command
otherwise enter the GPS coordinates in the Google Maps search field.
The
is only applicable to devices labeled:
NB:
Google Maps link
- 7892
=> Rev.10 and higher
- 7892
=> Rev. 05 and higher
My01
My11
