5.0 - MESSAGES FROM AND TO THE SYSTEM
Before configuring the module, familiarize yourself with all of the available
commands to interact with the system.
System management SMS (commands) are forwarded to the same mobile
from which they have been sent (except tracking and vehicle immobilization
confirmation messages).
Alarm messages are forwarded to the the preset mobile numbers.
!
ATTENTION
!
ATTENTION
The code for requesting vehicle speed, position and
must be a
3-digit number (default setting “000”, three zeros).
SIM validity
If a text message is sent with a wrong command, the system will reply with
an error notification message (command error).
NB:
The time given by the system is based on Greenwich Mean Time (GMT).
The initial configuration command must be sent to the tracker to notify
“password”, system “model” and “number” to which alarm SMS must be
forwarded, where:
-setup#: configuration command.
-password#: password, factory set by Gemini (“000000”, six zeros).
5.1 - INITIAL CONFIGURATION:
setup#password#version#main phone number#new
password#emergency phone number#
!
ATTENTION
The new password
Commands
must be a 6-digit code and can contain both numbers
and letters ( i.e.: AA1234 or aa1234). The password is key-sensitive
therefore by typing characters other than the ones entered (upper and
lower case letters are not equivalent), the system will not operate properly.
can either be sent with capital or small letters.
-version#: system model (in this case MINI).
-main phone number#: number to which alarm SMS will be forwarded
.
-new password#: user-chosen password (
).
-emergency phone number#: 2nd number to which alarm SMS will be
forwarded (optional, entering can be omitted).
When SMS is received, the LED blinks rapidly 5 times and the system replies:
always
preceded by the country code ( +44 for UK)
6-digit code mandatory
setup ok with password=new password.
