v0.9 | 14
Questions? Feedback? Please contact
Michael Thot
or assign him a Task using
this template
.
User Facing LED
●
Steady On:
Recording video and/or audio for the duration of illumination.
●
Flashing On (3x pulses):
Taking a still image.
Observer Facing LED
●
Flashing On (5x pulses):
Upcoming recording session is about to start.
●
Flashing On (Continuous, 5 second intervals):
While still image or video capture is in
progress.
Issues and Solutions
A. USB Is Connected, But Device Is Not Recognized
Suggested Solution
:
First, attach the magnetic USB connector to the device. Then, plug the
USB end into your computer.
The magnetic USB connection is known to be somewhat flaky on the EVT model. If the
magnetic connector attaches from front to back, it will violate specs regarding USB pin-
connection ordering. This in turn will lead to the device not being enumerated correctly by your
connected computer.
B. No Tactile Feedback on Capture Button
Suggested Solution
: N/A
Unfortunately, this is a fact-of-life for some EVT devices. Even without sufficient feedback, the
button should be operating normally. Press the button with the normal amount of pressure you
would use; pressing too forcefully may break the button.
Reporting Issues
Each device has an associated logbook within Tasks:
