5
BROWSE
LOAD A/B
JOGWHEEL
SCRATCH
PLAY/PAUSE
CUE
GAIN
CONTROL
FUNCTION
Allows you to navigate through folders or tracks.
Turn the knob to the right to advance the selection,
or turn the rotary to the left to reverse the selec-
tion. Push the knob to engage the selection.
When you have selected a file for play, it is assigned
to channel A or channel B by pressing the LOAD A
or LOAD B button.
Simulates a record feel and is used to SCRATCH
or alter the PITCH of a track, depending on which
mode is enabled.
Pressing the SCRATCH button engages the unit in
scratch mode. The jogwheel is used to simulate the ef-
fect of scratching a record. When disengaged, the unit
is in PITCH mode. Turn the jogwheel clockwise to raise
the pitch and counter-clockwise to lower the pitch.
Engages the selected file.
Pressing again tempo-
rarily stops the file from playing, and freezes it in its
current location. Press again to start the file.
By default, when there is no CUE point set (or
memorized), pressing the CUE button returns the
unit to the beginning of the track (0:00.00) and
pauses it. To set a CUE point during playback at a
time of your choice, simply press PAUSE and then
use the SEARCH function to make any adjustments
by frame. When the precise location is found, press
CUE to store this point.
While the unit is playing and after the cue point
has been programmed, pressing CUE will cause
the player to enter the PAUSE mode (PLAY/PAUSE
BUTTON blinks) at the programmed cue point (the
CUE LED is lit).
Boosts the signal of each individual channel.
1
2
3
4
5
6
7
