8
• Press “Time/ Temp” button to swap the time and temperature setting:
1. To adjust the Time (if needed) – press the “Time/ Temp ” button 1 time on
the control panel after selecting program, LED display will be blinking, then
press “+” or “-“ button to adjust the time needed.
2. To adjust the Temperature (if needed) –press the “Time/ Temp ” button 1
time on the control panel after selecting program, LED display will show the
unit of “C”, then press “+” or “-“ button to adjust the temperature needed.
• When a cooking time and cooking temperature are set, please press the “Start
/ Stop” button once to begin the cooking process.
• If the “Start / Stop” button is pressed during the cooking process, the appliance
will go into stand-by mode and the selected cooking program will be cancelled.
Keep Warm Function
• When the appliance is in standby mode, pressing “Keep Warm” button to
activate the keep warm function.
• The keep warm indicator will be ON and the display is shown “bb”. The keep
warm function will keep warm for the appliance at approx. 60ºC - 80
˚
C at the
first 6 hours.
• To cancel the Keep Warm setting, please press the “Keep Warm button” again
to disable the Keep Warm feature.
• When the selected cooking program is completed, it will switch to keep warm
function automatically, and then switch to the standby mode automatically after
2 hours.
Cook with difference cooking program
• The appliance pre-set 10 cooking programs. Press the “Function” button to
choose between these cooking programs in a cycle: Slow Stew, Hot Pot, Rice,
Porridge, Soup, Grill, Deep Fry, Stir Fry, Fry and Steam.
• The corresponding indicator will be blinking while selecting the cooking program.
• Time and Temperature may need to adjust according to your setting
• Press “Start / Stop” button once to activate the selected cooking program. The
corresponding indicator of the program will be lit.
• Once the cooking program is selected and started, no other program can be
selected until finish the current program. But the time and temperature can be
adjusted anytime.
• The red indicator will light on once you selected the cooking program.
• The cooking program can be stopped by pressing the “Start/ Stop” button in
any time during cooking. The selected program will be cancelled.
• You may also adjust the cooking program in stand-by mode. After adjusted the
cooking program, press the “Start / Stop” button again to re-start the cooking
program.
• There is a “beep” tone to indicate the program completed and it will switch to
keep warm function automatically. After 2 hours, a “beep” sound will be generated
and then switch to the standby mode automatically, the display will show “_ _ _ _”
