background image

3

This vacuum cleaner is not equipped with a dustbag. The dust/dirt is vacuumed into 
the transparent dust container instead. Once the dust is in this container, it whirls 
around so that it does not block suction. The air vacuumed in is cleaned by means 
of a washable permanent filter in the dust container and a HEPA 12 exhaust filter.

You must never vacuum without all filters in place or when a filter is damaged. If you 
do, dust may penetrate into the interior of the vacuum cleaner and damage the motor.

It is easy to see when the transparent dust bin needs emptying. The bin needs to 
be cleaned when dust accumulated reaches the MAX mark.

1.  Turn off the vacuum cleaner, and remove the plug from

the wall socket.

2.  Remove the dust container from the vacuum cleaner by 

pressing the Dust Bin Unlock Button and lifting the handle 
on the dust container. 

(

see Pic.1

)

3.  Press the Dust Bin Release Button to empty all dust 

easily. 

(

see Pic.2

)

4.  Wash all in water without any detergent or similar.
5.  Hold the unit handle and turn anti-clockwise direction to 
  release the filter cover. The washable permanent filter 

can be take out for cleaning.

6.  Allow the filter to dry completely, and replace it on the 

upper section by turning it clockwise direction until it clicks into place.

7.  Fit the upper section on the lower section so the hole in the top of the upper 

section points towards the handle.

8.  Replace the dust bin in the vacuum cleaner. Press down until you hear a “click” 

sound.

FILTER

IMPORTANT

EMPTYING THE DUST CONTAINER AND CLEANING THE PERMANENT FILTER

Pic.1

Pic.2

Summary of Contents for GVC2000S











Reviews: