background image

2

CAUTION: This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to other equip-
ment. To prevent electromagnetic interference with electric appli-
ances such as radios and televisions, use shielded cables and connec-
tors for connections.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
READ INSTRUCTIONS: All the safety and operating instruc-
tions should be read before the product is operated.
RETAIN INSTRUCTIONS: The safety and operating instruc-
tions should be retained for future reference.
HEED WARNINGS: All warnings on the product and in the oper-
ating instructions should be adhered to.
FOLLOW INSTRUCTIONS: All operating and use instructions
should be followed.
CLEANING: The product should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean with furniture wax, benzine,
insecticides or other volatile liquids since they may corrode the cab-
inet.
ATTACHMENTS: Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
WATER & MOISTURE: Do not use this product near water, for
example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in

a wet basement; or near a swimming pool; and the like.
ACCESSORIES: Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the prod-
uct should follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
CART: A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn. S

EE

F

IGURE

A.

VENTILATION: Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by plac-
ing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided or the manufactur-
er's instructions have been adhered to.
POWER SOURCES: This product should be operated only from
the type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
product dealer or local power company.
LOCATION: The appliance should be installed in a stable location.
NON-USE PERIODS: The power cord of the appliance should
be unplugged from the outlet when left unused for a long period of
time.
GROUNDING OR POLARIZATION:

- If this product is equipped with a polarized alternating current

line plug (a plug having one blade wider than the other), it will fit
into the outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polar-
ized plug.

- If this product is equipped with a three-wire grounding type plug,

a plug having a third (grounding) pin, it will only fit into a ground-
ing type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding
type plug.
POWER-CORD PROTECTION: Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from
the product.

OUTDOOR ANTENNA GROUNDING: If an outside antenna
or cable system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge unit, con-
nection to grounding electrodes, and requirements for the ground-
ing electrode. S

EE

F

IGURE

B.

LIGHTNING: For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES: An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact
with them might be fatal.
OVERLOADING: Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk of fire
or electric shock.
OBJECT & LIQUID ENTRY: Never push objects of any kind
into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
SERVICING: Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE: Unplug this product from
the wall outlet and refer servicing to qualified service personnel
under the following conditions:

- When the power-supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by following the oper-

ating instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qual-
ified technician to restore the product to its normal operation.

- If the product has been dropped or damaged in any way.
- When the product exhibits a distinct change in performance, this

indicates a need for service.
REPLACEMENT PARTS: When replacement parts are required,

C

A

U

T

I

O

N

PLEASE READ BEFORE USING APPLIANCE,

IMPORTANT WARNING & SAFETY INSTRUCTIONS!

RISK OF ELECTRICAL SHOCK DO NOT OPEN!

Summary of Contents for MPX-40























Reviews: