Gemini PMX-1100, Operator'S Manual

( 3 )

4. On the rear panel are 

3

 stereo 

PHONO/LINE (29, 32, 35)

inputs and 

4

 stereo

 LINE (28, 31, 34, 37) 

inputs.  The

PHONO/LINE

SWITCH (30)

 enables you to set the 

(29)

input to 

Phono

 or 

Line

.  The 

PHONO/LINE

SWITCH (33)

enables you to set the 

(32) 

input to 

Phono 

or 

Line

.  The

PHONO/LINE

SWITCH (36)

 enables you to set the 

(35)

input to 

Phono 

or 

Line

.  The phono inputs will accept only

turntables with a magnetic cartridge.  A 

GROUND SCREW

(38)

 for you to ground your turntables is located on the rear

panel.  The stereo line inputs will accept any line level input
such as a CD player, a cassette player, etc.

5. Headphones can be plugged into the front panel mounted

HEADPHONE (5)

  jack.

OPERATION:

1.

POWER ON:

  Once you have made all the equipment

connections to your mixer, press the 

POWER SWITCH (2)

.

The power will turn on and the 

POWER LEDS (17)

 will glow.

2.

CHANNEL 1:

SWITCH # (8)

 allows you to select  the

PHONO 1/LINE 2 (35) 

or the 

LINE 1 (37) 

input.  The

CHANNEL SLIDE (9)

 controls the input level of this

channel.

3.

CHANNEL 2: 

SWITCH # (10)

 allows you to select the 

PHONO

2/LINE 4 (32) 

or the 

LINE 3 (34)

 input.  The

 CHANNEL

SLIDE

(11)

 controls the input level of this channel.

4.

CHANNEL 3:

SWITCH # (12)

 allows you to select the 

PHONO

3/LINE 6 (29) 

or the 

LINE 5 (31)

 input.  The

 CHANNEL

SLIDE

(13)

 controls the input level of this channel.

5.

CHANNEL 4: 

SWITCH # (14)

 allows you to select the 

LINE 7

(28) 

or the 

MIC 2 (4)

 input.  The

 CHANNEL SLIDE

(15)

controls the input level of this channel.

6.

CROSSFADER SECTION: 

 The 

CROSSFADER (26)

 allows

the mixing of one source into another.  The left side of the

CROSSFADER (26) 

is 

CHANNEL 1

 and the right side is

CHANNEL 2

.  The 

CROSSFADER (26)

in your unit is

removable and if the need arises can be easily replaced.
Your Gemini mixer comes with an 

RG-45 PRO

(RAILGLIDE™)

Dual-Rail Crossfader

.

 RAIL GLIDE™

crossfaders have internal dual stainless steel rails that
allow the slider to ride smoothly and accurately from end
to end.  Also available is our 

CF-45 PRO (PROGLIDE™)

Dual-Rail Crossfader

. This unique crossfader features,

state of the art conductive plastic technology, for unlimited
useage.  Another crossfader we have available is the 

PSF-

45 (PRO SCRATCH™) 

crossfader with a special curve

designed for scratch mixing.  Just purchase one from your
Gemini dealer and follow the instructions:

INTRODUCTION:

Congratulations on purchasing the 

Gemini PMX-1100

mixer.  This state-of-the-art mixer is backed by a three year
warranty, excluding crossfader and channel slides.  Prior to
use, we suggest that you carefully read all the instructions.

FEATURES:

•  4 Stereo Channels
•  State of the Art Cue Section
•  3 Phono/Line Convertible, 4 Line, and 2 Mic Inputs
•  Talkover
•  Master and Record outputs
•  Master Treble and Bass Controls

CAUTIONS:

1. All operating instructions should be read before using this

equipment.

2. To reduce the risk of electrical shock, do not open the unit.

There are 

NO USER REPLACEABLE PARTS INSIDE

.

Please refer servicing to a qualified service technician.

 In the U.S.A., if you have any problems with this unit,
 call 1-732-969-9000 for customer service. Do not return
 equipment to your dealer.

3. Do not expose this unit to direct sunlight or to a heat

source such as a radiator or stove.

4. This unit should be cleaned only with a damp cloth.  Avoid

solvents or other cleaning detergents.

5. When moving this equipment, it should be placed in its

original carton and packaging.  This will reduce the risk of
damage during transit.

6.

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7.

DO NOT USE ANY SPRAY CLEANER OR LUBRICANT
ON ANY CONTROLS OR SWITCHES.

CONNECTIONS:

1. Before plugging in the 

15V AC Adapter (1)

,

make sure that the

POWER (2)

 switch is in the off position.  The

 POWER LEDS (17)

will be off.

2. The 

PMX-1100

 is supplied with 

2 

sets of output jacks. The

MASTER OUTPUT (26)

 jacks are unbalanced and used to

connect to your main amplifier.  The 

REC OUTPUT (27)

jacks can be used to connect the mixer to the record input of
your recorder enabling you to record your mix.

3. The 

MIC 1 (3)

 input (found on the front panel) accepts a

XLR

 connector.

 The

 MIC 2 (4)

 input (found on the rear

panel) accepts 

1/4"

 connectors.  All accept balanced

and unbalanced microphones.