2
CAUTION:
To reduce the risk of fire and electric shock:
1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
2. Do not mount or support wires in a manner that can cut or damage wire insulation.
SAVE THESE INSTRUCTIONS.
FEATURES
- Plastic housing with 4 pieces high power LEDs.
- UL power cord operated.
- Easy installation.
- High quality, long product life.
TECHNICAL SPECIFICATIONS
ASSEMBLY INSTRUCTIONS
1. Gently remove contents from packaging and lay out in a clear area.
2. Assemble the light stake parts A & B as shown in illustration 1 , Push the A and B parts together
until tighten the screws.
3. Push A through the circle, insert the grooves of projector, and tighten the circle, then adjust the
angle of projector.
4. Plug power cord into standard wall socket. ( illustration 2)
5. Unplug when not in use.
USER SERVICING INSTRUCTIONS
Fuse Replacement
WARNING:
Risk of Fire:
Replace only with same size and type of fuse.
WARNING:
Risk of Fire:
Do not replace the attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if attachment plug is
damaged.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on
the cord.
2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration)
3. Remove fuse carefully.
illustration 2
illustration 1
Light sourcing:
Material:
PC
1W LED * 2 3W LED * 2
120VAC 60Hz 0.11A 8.2W
2pcs
Rating
Fuse
A
B
