GEMO
GEMO
GEMO
GEMO
DT961
TEMPERATURE CONTROLLER
Attention
High Voltage,
Double / Reinforced NOT
CE Mark
Risk of Danger,
Risk of
Insulation
Litter
Warning
Electric Shock
TECHNICAL SPECIFICATION
•
Dimensions
: 96x96mm
•
Panel Cut-out
: 91x91mm
•
Display
: 2x3 Digits 7 Segment
•
Sensor Type
: Fe-Const, J type T/C
•
Measuring Scale
: 0 .. 600
o
C
•
SET interval
: 0 .. 450
o
C
•
Hysteresis Interval
: Fixed; 3
o
C
•
Resolution
: ± 1
o
C
•
Accuracy
: ± 0.3 % (Over full scale)
•
Control Form
: ON-OFF
•
Out Output
: Relay (NO + NC), 250VAC, 2A, Resistive load
•
Cold. Junc. Comp.
: 0 .. 50
o
C (T/C)
•
Sensor Failure
: Out is OFF in case of sensor failure, measurement out of range or
hardware fails to measure input signal.
•
Supply Voltage
: 100..240VAC, 50-60Hz
•
Power Consumption : < 6VA
•
Humidity
: 80% up to 30
o
C, then linearly decreases to 50% at 50
o
C (non-condensing)
•
Altitude
: < 2000 m
•
EMC
: EN 61000-6-1, EN 61000-6-3 (Only light industrial environment)
•
Safety
: EN 61010-1; Pollution degree 1, measurement category
I
, (Only light industrial
environment, double/reinforced isolated, non-conductive pollution environment)
•
Protection Class
: IP20; according to EN 60529
•
Operation Temp.
: 0 .. 50
o
C
•
Storage Temperature : -10
o
C .. 60
o
C (no icing)
•
Weight
: < 0.5 kg
•
Keys
: Micro switch
•
Torque for screwing : Max. 0.5 N.m
no:
normally open
nc:
normally closed
Gürbüzo
ğ
lu Elektronik San. ve Tic. Ltd.
Ş
ti.
http://www.gemo.com.tr
Çamlıtepe Cad. No:297 / 3-4 Siteler, Ankara, Türkiye
e-posta: info@gemo.com.tr
Tel: +90-312-3503900, Fax: +90-312-3511117
1
