GEMO
MODES OF OPERATION
Notes:
1. For Mode1; t.On and t.OFF are accepted as min. 000.1 sec, 00.01 min. and 00.01 hr.
2. Timer counts up for Mode 6 & 7, and down for other modes.
3. For all modes; counting is inhibited (freeze) when GATE is ON.
CLAEANING
Do not use any solvents (alcohol, thinners, benzine, acid, etc.) or corrosive substances to clean the device.
Use only a dry and clean non-abrasive cloth. Before cleaning, disconnect the power supply and mains
connections.
Gürbüzo
ğ
lu Elektronik San. ve Tic. Ltd.
Ş
ti.
http://www.gemo.com.tr
Çamlıtepe Cad. No:297 / 3-4 Siteler, Ankara, Türkiye
e-posta: info@gemo.com.tr
Tel: +90-312-3503900, Fax: +90-312-3511117
4
tA
tA
tB
tB
t.On
t.On
t.On
t.On
t.OFF
t.OFF
t.OFF
t.OFF
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
t.SEt
Mode : 4; Follow &
ON Delay
Mode : ;
2
One Shot after ON and OFF
Mode : ;
1
Flashing with START/RESET
Mode : ;
6 Chronometer - Count with START
Mode : ;
7 Chronometer-Count with START, Reset with RESET
Mode : ;
5
Delayed One Shot after OFF
Mode : ;
0
Pulsed Delay, OFF with RESET
Mode : 3;
OFF Delay
t.SEt
Start
Start
Out1
Out2
Out1
Out2
Out1 is ON when Start input is ON.
Out2 becomes ON "t.SEt" after START
input is ON. Out1 & 2 are OFF when
START input is OFF. Out1 & 2 are OFF
when RESET input is ON .
Out1 & 2 become ON when
START input is triggered
(OFF > ON) or (ON > OFF)
and become OFF after "t.SEt".
START input can re-trigger
when Out1 & 2 are ON.
Out1 & 2 are OFF when
RESET input is ON.
Out1 & Out2 are periodically first
ON for "t.On" and then OFF for
"t.OFF” after START input is
triggered (OFF > ON). Out1 & Out2
are OFF when RESET input is ON.
1
Out2 is ON
when timer elapses T.SEt.
& 2 are OFF
Out1 & 2 are OFF when
RESET input is ON.
Out is ON and timer counts up
when START is ON. Timer freezes
when START is OFF.
Timer
resets and Out1
when
START is OFF after Timer elapses
T.SEt.
1
Out2 is ON
when timer elapses T.SEt.
& 2 are OFF when
RESET input is ON.
Out is ON and timer counts up
when START is ON. Timer freezes
when START is OFF.
Timer
resets and Out1
Out1 & 2 are first ON after "tA" and then
OFF after "tB" when START is triggered
(ON > OFF). START input does not
re-trigger before "tB" elapses. Out1 & 2
are OFF when RESET input is ON.
t.SEt
t.SEt
Start
Start
Start
Start
t.SEt
t.SEt
Start
Reset
Reset
Gösterge
Gösterge
Out1
Out2
Out1
Out2
Out1
Out2
Out1
Out1
Out2
Out2
Reset
Out1 & Out2 become ON "t.SEt" after
START input is triggered (OFF > ON).
START input can not re-trigger timer
until it is reset with RESET input. Out1
& Out2 are OFF when RESET input is ON.
Start
Out1
Out2
Out1 & 2 become ON when START
input is ON. Out1 & 2 become OFF
"t.SEt" after START input is triggered
(ON > OFF). Out1 & 2 are OFF when
RESET input is ON .
