7
2.6QTH-D Ultrasonic Operating Procedures & Manual
By simply turning the ultrasonic cleaner ON and OFF will cause
the solution temperatures in the tank to fluctuate - rising from the
cavitational energy and falling from evaporative losses when the
ultrasonic cleaner is OFF. The longer an ultrasonic cleaner is ON – the
hotter the solution will become and the more intense the cavitation
is – the faster the solution temperature will rise. In addition, when
the heater is also left ON, the heat even further intensifies.
There are several variables that affect the rate of temperature increase
such as length of cleaning cycles, the batch load size of each cycle,
the rate of heat loss and the length of time between cleaning cycles.
Additionally, the performance of the ultrasonic cleaner itself plays a huge
part in the rate of temperature increase – cavitation density and power
levels. Caution should always be used when operating an ultrasonic
cleaner, as the solution does become hot, and can cause injury to hands,
etc. – to protect from possible injury, gloves must always be worn.
THINGS TO KNOW IN ORDER TO ADDRESS THE
CONCERNED CLEANING TECHNICIAN WHEN THEY ASK -
“WHY IS THE ULTRASONIC CLEANER GETTING SO HOT?”
• Energy causes substances to rise in heat.
• Higher energy levels cause accelerated rise in temperature.
• Cavitation is energy.
• The principle of ultrasonic cleaning is to cavitate a liquid.
• Using an ultrasonic cleaner will cause the
solution temperature to rise.
• An ultrasonic cleaner with high levels of cavitation
will cause the solution temperature to rise at a faster
rate than low level cavitation ultrasonics.
• GemOro ultrasonic cleaning systems yield highpowered, high
density cavitation through its proprietary ultrasonic technology.
• Gloves should be worn to prevent injury.
ONE YEAR LIMITED REPLACEMENT WARRANTY
IMPORTANT NOTICE - PREMATURE TANK
EROSION & COMPONENT FAILURE
Your complete ultrasonic is warranted for one year from the date
of purchase (as shown on the Warranty Registration Form and your
suppliers sales receipt) from defects in manufacturing and workmanship
when used in accordance with the GemOro Powerful Ultrasonics
operating instructions. In the event your ultrasonic fails to perform to
its specifications, please contact your supplier or GemOro (the factory)
