GemOro SparkleSpa Pro
®
Item #1791
THE FIVE BASIC STEPS:
STEP 1
– Unpack the SparkleSpa Pro, basket and bracelet /
watch holder from its box and plastic wrapping.
STEP 2
– Connect to electrical power source. DO NOT turn
the ultrasonic on unless you have first filled up the tank with
water.
STEP 3
– STEP 3 – To open the SparkleSpa Pro transparent
cover, press the crescent shaped gray button that is located
above the LED digital display to automatically expose the
tank and add the appropriate amount of water and /or mixture
of water and optional SparklePak Plus to the tank. Fill the
solution level to the MAX fill line as clearly marked on the
rear center portion of the stainless steel tank wall. DO NOT
allow the water to evaporate below this level or fill the tank
above this level as damage may occur and the warranty will
become void. Depending on the item being cleaned, while we
believe our GemOro SparklePak Plus cleaning solution with
special brighteners and cleaning agents is the best ultrasonic
jewelry cleaning solution available, water may also be mixed
with alternative appropriate cleaning solutions (certain liquid
household soaps, etc.) to also achieve better results. As
an example, a small amount of dishwashing soap with a
degreasing agent mixed with water will do the job. DO NOT
use flammable liquids, ammonia or acid / water mixtures in