GemOro Sparklette, Instructions For Use Manual

GemOro Sparklette

®

   Item #1789

THE FIVE BASIC STEPS:

STEP 1 – Unpack the Sparklette, basket and watch / bracelet / 
earring holder from its box and plastic wrapping.

STEP 2 – Attach power cord and connect to electrical power 
source. DO NOT turn the ultrasonic on unless you have first 
filled up the tank with water.

STEP 3 – To remove the Sparklette transparent cover, lift 
the mother-of-pearl style handle to expose the tank.  Add 
approximately 15oz (450ml) of water and /or mixture of water 
and optional SparklePak Plus packet to the tank. Fill the 
solution level to the MAX fill line as clearly marked on the rear 
center portion of the stainless steel tank wall. DO NOT allow 
the water to evaporate below this level or fill the tank above 
this level. For general cleaning, while regular tap water may be 
used, for enhanced results we recommend adding GemOro 
SparklePak Plus cleaning solution to the water. SparklePak 
Plus uses special brighteners and cleaning agents, and is 
known to professionals as the best ultrasonic jewelry cleaning 
solution available. DO NOT use flammable liquids, ammonia 
or acid / water mixtures in the ultrasonic tank as damage may 
occur and the warranty will become void. Keep the cover on 
when not in use to reduce solution evaporation.