9
3.3 Select the fold type
The TFM series has two fold pockets (A und B)!
To change the set-up of the fold pockets you first press down the adjusting screw of
the respective fold pocket (Quick adjustment see ill. 09). Now you can move the
position index depending on the fold type needed (see scale) (see also under 3.4).
To fix the fold pocket release the adjustment screw (= locked).
For fine adjustment of the fold pocket’s set-up turn the adjustment screw until you
have reached the exact position (see fine adjustment – ill. 09)
If only one fold is necessary (e.g. single fold) the fold pocket B will be closed by
pressing the deflector lever (see ill. 10)
Note:
When adjusting the deflector lever no paper may be in the fold pockets!
Scale Positionszeiger
Adjustment screw
Quick adjustment Fine adjustment
ill. 09
Deflector lever Deflector lever
Fold pocket B open Fold pocket B locked
ill. 10
