WPI-100G PCI Adapter
Wireless Broadband Anywhere
5
4. If you chose Infrastructure Mode, go to
Step 5
now. If you chose Ad-HocMode, you’ll
see a screen similar to that shown in Figure 4-4. Select the correct operating channel for
your network from the
Channel
drop-down menu. Then, select the
Network Mode
from the
drop-down menu. Click the
Next
button, and go to
Step 4
. Click the
Back
button to change
any settings.
Channel
- The channel you choose should match the channel set on the other devices in
your wireless network. If you are unsure about which channel to use, select the default
channel (Channel 6).
Figure 4-4
5. The Setup Wizard will ask you to review your settings (as in Figure 4-5) before it starts
to copy files. Click the
Next
button to save these settings, or click the
Back
button to
change any settings.
Figure 4-5
6. After the files have been successfully copied, the screen in Figure 4-6 will appear. Click
the
Exit
button.
Figure 4-6