Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 16/03/2020 NUMERO DE REVISIÓN: 1
10
6.13 Carefully insert the position indicator, matching its inner key with the cleft of the
shaft (Fig.13):
6.14 Put DIP 1 in ON position, connect the grey connector to the power supply, put DIP 1
back to the prior position. Wait until the actuator make a complete maneuver (Fig.14A
and B):
6.15 Disconnect the grey connector from the powe supply.
6.16 Use the configuration you need by moving the DIPs, according to the
instrumentation signal (Fig.15):
