Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 16/03/2020 NUMERO DE REVISIÓN: 1
12
6.20 Mount the 3 outer connectors together with its rubber joints and fix them to the
cover, by using the screws (Fig.19):
The unit is ready to work.
6.21 Outer Set-Up (only if necessary):
•
B plug: Connect a cable between PIN 1 and PIN Earth (Fig.20).
•
A plug: Connect it to the power supply.
•
B plug: Disconnect the cable between PIN 1 and PIN Earth.
The actuator will make a complete maneuver.
7. External Electrical Connections
WARNING:
Make all connections as shown on the wiring diagram affixed
to the new cover.
