Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 16/03/2020 NUMERO DE REVISIÓN: 1
6
6.1 Preparing the Cover
The cover of the kit is for a
GE-0. GE-05 y GE-1
models. In case you want to mount a kit
on
GE-15
, follow the instructions:
Remove the Cap and leave the o’ring inside the hole
Remove the Sleeve leave the o’ring inside the hole
Introduce the Sleeve in hole A and
press it until is fully inside (Fig.a).
Introduce the Cap in hole B and
press it until is fully inside (Fig.b).
