Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 16/03/2020 NUMERO DE REVISIÓN: 1
9
6.9 Mount the DPS positioner PCB (C), matching the cleft of the shaft with the key inside
the DPS gear (Fig.10):
6.10 Press the DPS positioner along the shaft until PCB connector (JP3) is plugged in the
actuator PCB connector (JP2) (Fig.11):
6.11 Fix the DPS positioner PCB (C) to the plastic column (B) with the plastic fixing screw
(E) (Fig.12A):
6.12 Connect the remaining cable (A) to the connector base on the DPS PCB (C)
(Fig.12B):
