Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 17/06/2019 UPDATE NUMBER: 1
10
7. Exploded view
8. Start-up (Settings)
Note: The positioner is already calibrated when leaving the factory
8.1 Zero Setting
•
This sends the stroke start signal (4 mA).
•
Rotate the ZERO adjustment wheel clockwise or anti-clockwise until the reference
lines of the indicator cam match the closed position of the valve.
ZERO
•
In the case of a simple effect actuator, check that it is at the zero point at standard
pressure. Otherwise repeat the Zero Adjustment.
Cover
Zero
Adjustment
Torque
Transmitter
(art. 5952 04)
Pilot Valve
Span
Adjustment
Stroke transmitter
Casing
Transmission
lever
