100
User
Manual
GWG Gateway
•
Destination Network: 192.168.2.0,
•
Netmask: 255.255.255.0,
•
Interface: gre_x.
Figure
75
– Routing configuration page for GWG Gateway 1
•
Optionally configure IP Filtering to block any unwanted incoming traffic.
•
On the device connected on GWG Gateway 1 setup default gateway 192.168.4.1
The GWG Gateway 2 configuration:
•
Click
LAN Ports
Tab, to open the
LAN Ports Settings
screen. Use this screen to configure LAN
TCP/IP settings. Configure IP address and Netmask.
•
IP Address: 192.168.2.1,
•
Subnet Mask: 255.255.255.0,
•
Press
Save
to accept the changes.
Figure
76
– Network configuration page for GWR Router 2
•
Use SIM card with a static IP address, obtained from Mobile Operator. (Note the default gateway
may show, or change to, an address such as 10.0.0.1; this is normal as it is the GSM/UMTS/LTE
provider’s network default gateway).
•
Click
Mobile Settings
Tab to configure parameters necessary for GSM/UMTS/LTE connection. All
Summary of Contents for GWG
Page 1: ...GWG Gateway USER MANUAL GWG Document version 1 0 1 Date July 2016 WWW GENEKO RS ...
Page 43: ...43 User Manual GWG Gateway Figure 22 RIP configuration page ...
Page 136: ...136 User Manual GWG Gateway Click OK Figure 125 Policies from trust to untrust zone ...
Page 156: ...156 User Manual GWG Gateway Figure 150 Configuration page for SIM keepalive ...