60
User
Manual
GWG Gateway
Figure
31
–PPTP Summary screen
Settings – L2TP
L2TP is suitable for Layer-2 tunneling. Static tunnels are useful to establish network links across IP
networks when the tunnels are fixed. L2TP tunnels can carry data of more than one session. Each session is
identified by a session id and its parent tunnel's tunnel id. A tunnel must be created before a session can be
placed in the tunnel.
Figure
32
– L2TP configuration page
L2TP
Label
Description
Number
Selected tunnel number. Number of L2TP tunnels is limited to 5.
Enabled
Select this option to enable L2TP tunnel.
Tunnel name
Unique tunnel identifier.
Local IP address
Set the IP address of the local interface to be used for the tunnel. This address
must be the address of a local interface.
Tunnel ID
Set the tunnel id, which is a 32-bit integer value. Uniquely identifies the tunnel.
The value used must match the peer tunnel id value being used at the peer.
Summary of Contents for GWG
Page 1: ...GWG Gateway USER MANUAL GWG Document version 1 0 1 Date July 2016 WWW GENEKO RS ...
Page 43: ...43 User Manual GWG Gateway Figure 22 RIP configuration page ...
Page 136: ...136 User Manual GWG Gateway Click OK Figure 125 Policies from trust to untrust zone ...
Page 156: ...156 User Manual GWG Gateway Figure 150 Configuration page for SIM keepalive ...