Generac Power Systems DF 2.2, Owner'S Manual

6

                                       Owner’s Manual for DF 2.2 Dust Suppression System

General Information

Setup

Water System Connection

1.

See 

Figure 2-2

. Verify water valve (A) is closed.

Figure 2-2. Connecting Water Supply

2.

Connect water supply to water fitting (B). 

Electrical Connection

1.

See 

Figure 2-3

. Verify switch (A) is in OFF position.

Figure 2-3. Electrical Connection

2.

Connect  to  socket  (B)  240v  power  with  the
following requirements:

•

Extension cord must be marked “WA” or indicate it
is suitable for outdoor use.

•

Power  source  must  be  equipped  with  residual-
current device (RCD) protection.

•

Use  adequately  sized  extension  cords  of
appropriate length. See 

Table 1

 for recommended

cable size and length.

WARNING

(000584)

Personal injury. Only use water from controlled, reliable 
sources. Uncontrolled water could contain bacteria. Inhaling 
mist containing bacteria could result in death, or serious 
injury.

A

B

008852

Table 1 - Recommended Shore Power Cable 

Size and Length

Suggested Power Cables and Lengths

50 ft. (15.2 m) 10/3—(L5-20P – L5-20R)

100 ft. (30.5 m) 12/3—(5-15P – 5-15R)

(000145)

DANGER

Electrocution. In the event of electrical accident,  
immediately shut power OFF. Use non-conductive  
implements to free victim from live conductor. Apply  
first aid and get medical help. Failure to do so will  
result in death or serious injury

.

(000152)

DANGER

Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
injury.

(000104)

DANGER

Electrocution. Water contact with a power 
source, if not avoided, will result in death 
or serious injury.

A

B

008853