User Guide
Dust fighter_user guide_1.2_EN_28-06-22
3
Introduction
Dust Fighter DF Smart
Item Code
SHOP001.07
Electrical Engine
Single Phase 230V 50Hz - 2.2 kW
Water Connection
Express Type 1/2” Quick Connection
Fan
9 Nylon Blades, Aluminium Hub
Air Flow
90mm
3
/min
Coverage (without wind)
13m
Nozzles Holder
Stainless Steel With 12 Connections
Nominal Pressure
1 - 5 bar
Water Filter
300 µm (0.3mm)
Tilting Range
10º - 50º
Dimensions
985 x 785 x 835 (L x W x H)
Weight
79 Kg
1.0 bar - 5.4 l/min
Water Consumption
1.5 bar - 6.6 l/min
2.0 bar - 7.5 l/min
2.5 bar - 8.5 l/min
The DF Smart Dust Fighter controls the disbursement of dust and airborne dust on-site using a fine water vapour
which is spread over the designated area. The water vapour attaches to dust particles, bringing them safely to the
ground. The wheeled lightweight equipment is easy to transport and can be used across a number of different
applications. It is particularly useful for dust suppression when working on demolition sites where excavator
attachments such as Hydraulic Hammers or waste processing equipment is being used. The Dust Fighter can be
tilted to the preferred angle and has extremely efficient water consumption compared to traditional hosing
methods and this also helps to keep mud and sludge to a minimum.
Equipment Specification
Equipment Identification
A.
Start Button
E.
Lifting Hook
I.
Water Connection
B.
Socket
F.
Vapour Nozzles
J.
Tilting Blower Handle
C.
Stop Button
G.
Water Filler
K.
Forklift Pockets
D.
Tilting Blower Knob
H.
Water Tap
